The historical forerunner of the entire Gianni Ferrari range, Turbograss is a multifunction machine suitable for all seasons, ideal for cutting and collecting grass, leaves, litter, and all kinds of waste.
With an effective rate of 8,000 sq.m/hour and perfect cutting and collecting quality, it is known all over the world for its superior manoeuvrability.
ZERO TURNING RADIUS
The innovative system of dual hydrostatic transmission and the compact dimensions are the most significant
features of the manoeuvrability of this machine with zero turning radius (ZTR).
- Extreme speed on various kind of grounds, for great productive efficiency
- Great Manoeuvrability among trees, shrubs, flower-beds and in narrow passages of parks and gardens
- Zero time wasting due to manoeuvres
- Manual finishing eliminated: optimized working times
CUTTING SYSTEM
The revolutionary frontal cutting deck RCA, available with a cutting width of 110 or 130 cm, assures a very similar cutting quality to helicoidal blades. The floating action solves the most difficult cutting conditions even on slight slopes and undulating terrain.
The cutting unit is equipped with 2 discs with reversal rotation blades and has two significant Gianni Ferrari patents:
Cutting system | 110 RCA | 130 RCA |
---|---|---|
Features | 2 Discs reverse rotation | 2 Discs reverse rotation |
Cutting width | 110 cm | 130 cm |
Dimensions (Lenght/width/height) | 91/113/35 cm | 133/116/35 cm |
Cutting height (adjustable with lever) | from 2 to 8 cm | from 2 to 8 cm |
Peso | 110 kg | 150 kg |
Central opening | Adjustable bulkhead | Wear-resistant plastic strips |
REVERSAL ROTATION OF BLADES
The RCA deck has discs with double blades turning in opposite direction compared to traditional mower decks, with an increasing of cutting quality and an effective collection, without clogging even with damp and wet grass.
FRONT DECK OPENING
On the front of the deck skirt there is a central opening (with mechanically adjustable bulkhead for the 110 cm model and wear-resistant plastic strips for the 130 cm model), to make the edge higher than the cutting level of the blades.
As a result the grass does not lay flat and the cutting is more accurate even with long grass.
The mowerdeck can be raised and tilted for easy access and better and faster maintenance.
3 GREAT ADVANTAGES
- Extremely strong and resistant to impact
- No accumulation of grass and dirt in the upper part of the deck
- Grass and debris reduced size (VRS = Volume Reduction system) for better collection and compacting in the grasscatcher
SUCTION AND COLLECTION
The big turbine of Turbograss with high suction capacity, is equipped with 4 curved anti-clogging blades which are easily replaced as required.
Its action reduces the volume of grass and leaves collected up to 5 times the original volume, making it possible to take full advantage of the capacity of the grasscatcher.
The grasscatcher, in high resistance polyethylene, is equipped with:
- Galvanized metal filter and plastic protection: minimized cleaning operation
- Automatic hydraulic dumping: rear door is opened automatically
- Adjustable chute and buzzer warning when the catcher is full.
The efficient and strong elevation of the optional hydraulic high lift system of grasscatcher* allows the operator an easy and quick grass discharging directly in the case of a truck or trailer.
Lenght/width | 154/110 cm | 173/110 cm |
Height with lifted/lowered Rops | 183/150 cm | 183/150 cm |
Grasscatcher capacity | 350 L | 500 L |
Weight | 45 kg | 50 kg |
Applicable on Turbograss | 630 – 630E | 630 – 630E – 922 |
Weight | 70 kg |
Max. discharge height | 186 cm |
1
1
WHEELS
Front drive wheels (dimensions 20×10.00-8)
Rear wheels: 3 options
- SINGLE WHEEL: maximum speed and lightness (dimensions 13×6.00-6)
- TWIN WHEEL: less trampling of the turf (dimensions 15×5.00-6)
- REAR AXLE: more stability and simplified charge/discharge (dimensions 15×5.00-6).
HYDRAULIC PTO ENGAGEMENT
The PTO can be operated with electro-hydraulic system: a button allows for smooth engagement of blades.
ENGINE MODELS
Both petrol models (with Briggs & Stratton Vanguard engines) and diesel model (with Kubota engine) are perfectly aligned to the new STAGE V class, in full compliance to emissions regulation.
ELECTRONIC ENGINE EVOLUTION
The 630-petrol model is available even with Electronic Injection Engine (EFI). The Electronic Engine Evolution, the last upgrade made on Turbograss, ensures the maximum fuel efficiency and an increased torque, for increased machine performances and equipment’s productivity.
The distribution with OHV (Over Head Valves) technology ensures longer engine life (in addition to 3 years warranty) and greater fuel saving, despite of its compact dimensions.
Furthermore, the combined action of the MagnetronR injection system and ECU (Electronic Control Module), improves machine starting with its automatic altitude compensation.
EFFICIENT AND ECOLOGICAL
- +POWERFUL
Greater efficiency and easier maintenance - +ECOLOGICAL
Reduced CO2 emissions - +SAVING
Up to 25% less fuel each year
TECHNICAL DATA
STAGE V | 630 | 630E | 922 |
---|---|---|---|
Engine | Briggs & Stratton VANGUARD | Briggs & Stratton VANGUARD | Kubota D902 |
Fuel | Petrol | Petrol | Diesel |
Power/cylinder capacity/horsepower | 17kW / 630cc / 23 | 17kW / 630cc / 23 | 16kW / 898cc / 22 |
N° Cylinder | 2 | 2 | 3 |
Tank capacity | 25 L | 25 L | 25 L |
Max. speed | 8 Km/h in both directions | 8 Km/h in both directions | 8 Km/h in both directions |
Machine weight without elevator/grasscatcher | 400 kg | 400 kg | 500 kg |
Battery | 12V 50Amp | 12V 50Amp | 12V 65Amp |
Equipment | Hour counter | Hour counter, rev counter, signaling of engine anomalies | Hour counter, water temperature |
EQUIPMENTS
SIDE DISCHARGE/MULCHING DECK
With 3 blades it ensures a perfect grass mulching. Very strong, with reinforced and replaceable in case of wear edges. Through a quick conversion system, it instantly switches from mulching to rear discharge. Can be positioned vertically.
Cutting width | 130 cm |
Dimensions (Lenght/width/height) | 103/152/32 cm |
Adjustable cutting height with lever | From 1 to 9 cm |
Peso | 110 kg |
DUAL CUTTM REAR DISCHARGE/MULCHING DECK
With 3 blades it ensures a perfect grass mulching. Very strong, with reinforced and replaceable in case of wear edges. Through a quick conversion system, it instantly switches from mulching to rear discharge. Can be positioned vertically.
Cutting width | 130 cm |
Dimensions (Lenght/width/height) | 123/133/43 cm |
Electric adjustable cutting height | From 1 to 9 cm |
Weight | 134 kg |
FLAIL MOWER MFA 110 SMART SYSTEM
Entirely produced in Gianni Ferrari, the new Flail mower is indicated both for cutting fine grass (paddle blades) and for cleaning rustic areas in presence of brushwood (Y-blades). With also vertical blades combined with the previous ones, it aerates the ground during the work.
Three types of work with a single equipment.
Cutting widht | 110 cm |
Standard equipment | Paddle blades and vertical blades kit (24 blades) |
Dimensions (Lenght/width/height) | 113/157/53 cm |
Adjustable cutting height with single lever | From 0,5 to 9 cm |
Weight | 120 kg |
SNOW BLADE
Hydraulically liftable and adjustable, the snow blade makes the use of Turbograss productive also in winter.
Working width | 130 cm |
Dimensions (Lenght/width/height) | 62/130/41 cm |
Weight | 90 kg |
SNOW THROWER
Two-stage snow thrower 130 cm with hydraulic rotation and plexiglass windscreen.
Working width | 130 cm |
Optional | Plexiglass windscreen |
Dimensions (Lenght/width/height) | 115/110/116 cm |
Weight | 130 kg |
SALT SPREADER
It could spread salt, sand, grit, manure and granulates of different kind and weight, covering surfaces from pavements to roads.
Made by anti-corrosion material, it is composed by a distributor, spreading deck in stainless steel and polyethylene basket.
Capacity | 110 L |
Spreading width | from 80 to 600 cm |
Dimensions (Lenght/width/height) | 60/50/108 cm |
Weight | 40 kg |
Menu
- Home
- Company
- Products
- Area Media
- Dealers
- Contact
Contacts
KUBOTA GIANNI FERRARI s.r.l.
Via Vespucci, 53
42046 Reggiolo (RE) Italy
Tel. +39 0522 973697
Fax +39 0522 973707
email: kg_g.info@kubota.com