Turbo Z2 - Gianni Ferrari (2024)

The TurboZ’s mulching/rear-discharge cutters adapt perfectly to undulating terrain: their floating movement ensures that the cut is always accurate and with excellent performance. They also come with sturdy trolleys equipped with anti-puncture wheels made of soft solid rubber.
The cutting width ranges from 112 to 190 cm.

The various types of mowers mainly use discs with double blades – positioned in line – or single blades arranged in a triangle with belt drive.
Both types have large, deep and very robust tanks for excellent shredding and distribution of the grass. They also have the added benefit of the practical DUAL CUT™ quick conversion system on the front left side of the deck, to change the cut-type in an instant, from mulching to rear discharge and vice versa.

The user operates the infinitely-variable cutting height adjustment from the edge of the machine via a button which can also be effortlessly used to get the deck in vertical position for easy cleaning and maintenance or to reduce the machine dimensions for transportation or garaging.
However, manual management is only available on the TurboZ 440D, with the help of a hydraulic lift.

The TurboZ 440D has two levers, while the 22 and 23 Hp mowers are available in two versions with two or three levers. This allows the user to choose the most practical option for all their needs.
The driving system with three levers (two steering levers and one speed control lever) provides for effortless and precise control. In this case, the dashboard, located on the right-hand side, provides information at a glance.
In the two-lever system, the PTO and front linkage controls are located on the end of the right lever and the control panel, also on the right, is equipped with specific indicators and instruments.
The TurboZ’s come with a comfortable contour-moulded seat, adjustable in depth, with lumbar support and headrest, adjustable armrests and springs, also in a heated version.

Seat Grammer Super Comfort with lumbar support, headrest and armrests (optional)
Seat suspension Parallelogram suspension with adjustable height position and driver’s weight adjustment (only for Grammer Super Comfort)

TurboZ’s are also designed to optimise ordinary and extraordinary operations.
Therefore, all routine maintenance and grease points are reduced to a minimum, and even the inspection points are easy to reach thanks to the practical ‘folding opening’ of all the hoods and the easy tilting of the driver’s seat.

The hydrostatic transmission for all models in the range is TWO-WHEEL DRIVE.
In the smaller models it is based on two compact transaxles with external oil filter, while on the TurboZ 440D it is based on pumps and efficient Danfoss axial piston motors with mechanical gearboxes, which provide high performance, excellent traction and high transfer speed.
The PTO is engaged electrically using a simple button on the control panel (on three-lever models) and a switch directly on the end of the right lever (on two-lever models) which operates a powerful ELECTROMAGNETIC CLUTCH, adjustable to maintain efficiency over time, on 22 and 23 Hp models.
The clutch safety brake for stopping the PTO is already integrated into the system.
A PTO shaft provides the power transmission from the engine to the front attachment with higher efficiency and reliability than a conventional belt transmission.
Finally, diesel version is fitted with a convenient front hydraulic lift device enabling the machine to mount kerbs and other obstacles, simply by pressing a pushbutton.

Brakes Hydrostatic service brake
PTO Mechanical, with PTO shaft

The petrol model, equipped with Briggs & Stratton Vanguard, and the diesel model, with Kubota engine, are perfectly adapted to the new STAGE V class, and STAGE IIIA for non-EU countries, in full compliance with exhaust emission regulations.

Deck with a very deep cutting chamber made from a single pressed steel plate, without any additional parts. The inner surface is completely smooth and free of edges for optimal airflow. Thanks to the special plug, the mulching/rear discharge conversion can be completed in a few minutes during use.
It can be positioned vertically.

With three blades, it ensures optimal shredding of the grass.
Very powerful, with reinforced edges that can be replaced if worn. Using a quick conversion system, it switches from mulching to rear discharge in no time at all.
It can be positioned vertically.

Very powerful tool, suitable for cutting fine grass and for cleaning rustic areas and shredding brushwood.
It can be positioned vertically.

Very powerful tool for precise cutting in fine grass, weeds and brushwood. Available with two cutting lengths and also in Heavy Duty version with heavy spoon blades (optional)

Deck with three blades arranged in a triangle and belt drive: the only one on the market with maintenance-free blade hubs, with tapered bearings and oil-bath lubrication for maximum durability. It can be positioned vertically.

Inline™ mulching and rear discharge decks have three or four rotors aligned on the same axis and synchronised with oil-bath gear drive. Compact design with contained front section to adapt naturally to the undulations in the ground. The Dual-Cut™ rapid conversion system allows you to change the type of cutting, mulching or rear dumping in a moment, simply by using a handy lever.

Device with a reinforced frame and a brush with cylindrical or segmented plastic bristles. The rotation of the brush, placed diagonally, is linked to the PTO joint. Its direction of rotation allows the tool to accumulate debris/snow on its right side. It is also equipped with two swivel wheels for easier driving and use on every kind of surface. Suitable for cleaning courtyards, cycle paths and roads and for removing freshly laid snow.

Lifting and swivelling, the snow blade makes the TurboZ productive even in winter.

Snowthrower, 110 cm, double stage, hydraulic orientation and plexiglass protection for the operator.